Product ID:SOLID COLOR ACRYLIC STAIN, A2000
MSDS Date:03/01/1991
FSC:8010
NIIN:00N027234
MSDS Number: BYHGM

EVR-GARD COATINGS CO

16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

0.1 @ 68F

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 100 PPM (MFR)

ACGIH TLV: C 50 PPM,VAPOR

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

111 GR/LT

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:MAY CAUSE HEADACHE &
NAUSEA, DIZZINESS. SKIN & EYES:PRIMARILY AN IRRITANT. REDNESS OR
RASH ON SKIN. INGESTION:NAUSEA, DIZZINESS, HEADACHES.
CHRONIC:PROLONGED INHALATION MAY CAUSE HEAD ACHE AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT WITH MATERIAL MAY
CAUSE DERMATITIS.

First Aid:INHAL:REMOVE PATIENT TO FRESH AIR. EYES:FLUSH WITH CLEAN
WATER FOR @ LEAST 15 MINUTES. SKIN:REMOVE SATURATED CLOTHING & WASH
SKIN W/SOAPY WATER THOROUGHLY. INGEST:INDUCE VOMITING WITH 1-OZ OF
SYRUP OF IPECAC FOLLOWED IN 5 MINUTES WITH A GLASS OF WATER. CALL
A DOCTOR.

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT SUPPORT
COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT
MATERIAL-SAWDUST, SAND, CLAYS, ETC, AND FLUSH SPILL AREA WITH LOTS
OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
USE AND STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP
FROM FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.

Respiratory Protection:THE USE OF NIOSH/MSHA APPRVD MASKS DURING APPLIC
TO AVOID EXCESS INHAL OF VAPS IS HIGHLY RECOMMENDED. OPEN WINDOWS &
DOORS OR USE OTHER MEANS TO INSURE FRESH AIR ENTRY DURING
APPLICATION AND DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HNDLG & APPLIC OF
THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL TIMES.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:OBSERE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT & COLORS - SLIGHT AMMONIA SMELL.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55-GAL METAL DRUMS AND DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.